Train like you fight.
Radio, fire and debrief software for aerial wildfire training, built by Air Attack Officers. Lorby Comms puts real radios at every seat; Lorby Wildfire Response runs the fire.
Communication is the key to a successful mission.
With several aircraft in a concentrated wildfire airspace, the radio is how the operation stays safe. Lorby Comms gives every seat the radios of the real aircraft, over IP, and records the whole incident for the debrief. It runs on its own, with or without the rest of the platform.
Video: the real Lorby Comms software, panel by panel: the Server and its connected seats, the Client panels at each seat, recording with markers, and the Player.
Server
Runs once, on the instructor station. Sets the channel names and frequencies, plays background radio traffic and records every channel.
Client
Runs at every seat: a role player, a simulator or a tablet. Each seat shows only the panels it needs.
Player
Opens the recording for the debrief. Double-click a marker to jump to it; listen to one frequency or to all of them.



Your own channel identifiers
Name the VHF and satellite phone channels and frequencies once, on the Server. Every seat that joins gets the same setup: teach your own system, or learn another agency's.
Lorby Jukebox
The Server plays recorded radio traffic across the network. Turn the rate up and the incident sounds as busy as a real one.
Record the whole incident
Every channel is recorded on the Server. Mark position flags a moment, such as the start of a checklist, to come back to.
The small details
TX and RX icons show which radio is transmitting and which one you are hearing. Radio management is made of details like these.
Start simple
Overwhelming a student rarely teaches the student much. Set the comms up as simple or as complex as the lesson needs.
Procedures, not only buttons
For most pilots the hardware is second nature. Lorby Comms is where they practise wildfire communication procedures together.
Run it on a tablet
The whole system runs on a Windows PC or tablet, so a seat can be a desk, a cockpit or a lap.
Use real hardware
A mouse is not a radio. Lorby Comms talks to Arduino microcontrollers, and we build the audio panel and radio heads found in airtankers and birddogs.
Outside wildland fire
Any team that trains on radios can use it: dispatch, ground crews, other emergency services.
“Less is more.”
Every pilot has heard it. Painting a detailed picture with as few words as possible, and using the equipment efficiently, takes practice. That practice is what Lorby Comms is for.
Lorby Wildfire Response runs the fire. Every seat fights it.
A networked, multi-user application that works in real time with Lockheed Martin Prepar3D. Create fires and shape their size, intensity and growth, control the weather, add scenery, watch from any viewpoint, and record it all.
- In service
- Alberta Wildfire, Hinton Training Centre
- Engine
- Lockheed Martin Prepar3D, realistic terrain worldwide
- Join from
- The sim room, or anywhere with an internet connection
- Scenarios
- Save a library; fly it again with a different outcome



Take full control of the scenario.
Google Earth imagery is the 2D sandbox, and Prepar3D's terrain matches it closely. Change anything while the scenario runs.
Control the fire
Set size, intensity and growth. Add spot fires outside the retardant line, or divert to a new incident.
Control the weather
Loads carry real weight, so heat matters: a full load in the morning is hard work in the afternoon. Drop the visibility to two miles.
Connect with everyone
Anyone with Prepar3D and the Pilot module can join the Instructor Station server.
Hazards, not only fire
Tall snags on the fireline, towers on a ridge, heavy equipment pushing guard down a flank.
Observe everything
Many views around the incident, static or following an aircraft or ground resource.
A.I. aircraft
A flight path editor runs tankers on one flank and helicopters on the other, with no extra pilots.



Your connection to the fire. It feels right.
LWR Pilot connects each simulator to the Instructor Station and sets the aircraft up: external loads, retardant or water, drop rates, weight and balance, with gauges for drop control, radar and scenario location.
Real-time weight shift
The aircraft reacts when the load releases, as it does in the real one. E-dump when you need every bit of performance.
Weather that fights back
Low visibility, turbulence over the fire, up and down drafts placed anywhere.
Drop controls in hand
Arm the tank, set coverage and amount on hardware or a joystick axis, not a mouse.
Extreme fire behaviour
Fire that crowns, spots and runs. Sometimes learning to do nothing is the hardest lesson.
Crews, equipment, night
Helicopters place people and gear that every seat sees; drip torch; dynamic fire and vehicle lights.
Lorby FLIR
Train with the tools you use: the simulated FLIR finds fires hidden from view. Built for the Alberta Wildfire birddogs.

Brief, simulate, debrief. Then do it again, better.
The fireline is not the place to test new tactics. LWR Classroom shows the mission live on external views and GPS tracking in Google Maps, then replays the flying and the radio together.
- Brief. Load a saved scenario or build one on real terrain, and brief every crew before launch.
- Simulate. Aircraft and role players work the same fire on Lorby Comms while the instructor changes conditions.
- Debrief. Replay the flying and the radio, jump to marked moments, see what worked and what didn't.
Our software, in cockpits that work like the real aircraft.
The newest part of what we do. Muscle memory comes from doing the action, so we build the hardware that is not available off the shelf, in our own shop.
- DeliveredTC695 Air Attack, Alberta WildfireG600 software with FLIR and TCAS, dual-seat radio and intercom, two role-player stations
- DeliveredConvair 580 retrofitModern computers and control loading, back in airtanker pilot training
- HardwareComms and drop hardwareAudio panel, Arduino interface, USB drop controller
- In buildHelicopter Coordinator simulatorObservation and HLCO training
Hear your own radio plan in Lorby Comms.
Tell us what your crews fly, which radios they use and how they train. We will set up Lorby Comms with your channel plan, and show the Instructor Station, Pilot and Classroom.
A coordinated aerial attack is a perishable skill. Our goal is to make simulated aerial wildfire training better, easier and more affordable for every agency. The team brings 30 years of wildland fire experience, including 15 in fixed-wing Air Attack, Helicopter Coordinator and simulator program work, and 30 years of software and project delivery.
- Wildfire Training Solutions Inc.
- Simulators, hardware, training programs and support
- Lorby Wildfire Response Inc.
- Software subsidiary: LWR, Lorby Comms and Lorby FLIR
- Lorby-SI
- Development partner for the Lorby software
- Alberta Wildfire
- Air Attack simulator; LWR at the Hinton Training Centre
- Phone
- (778) 538-3473
- Office
- 266 Montego Road
Kamloops, BC V2H 1N1 - Social
- Facebook · YouTube

